Rectangular horizontal autoclave 250 liters with self-generated steam microprocessor 50x50x100 cm Cat. JRS-AC5050100-VA Jorsan

Horizontal rectangular autoclave 250 liters with self-generating steam microprocessor 50x50x100 cm Cat. JRS-AC5050100-VA Jorsan

Description:

Our equipment uses the physical principle of gravity air removal through the direct supply of water vapor, which generates saturated steam pressure as a sterilizing agent. This efficient method allows for the sterilization of clothing, instruments, liquids, Petri dishes, infant formula, utensils, and all items stable at humidity, pressure, and a temperature of 121° Celsius.

It is delivered with a cabinet or for wall mounting; these units are ideal for sterilizing clothing, surgical instruments, and liquids, as well as for processing infant formula or laboratory solutions.

Features:

• From the digital control's illuminated screen, one of SEVEN sterilization programs can be selected (small clothing packs; large clothing packs; small liquid bottles; large liquid bottles; rubber or latex material; instruments, and re-drying).
• All programs have visual and audible alarms.
• On the microprocessor screen, separate values for chamber and jacket temperature, the selected program, sterilization time, and countdown drying time can be seen.
• If the user requires it, after each sterilization cycle, a graph and report of pressures and temperatures, minute by minute, of the selected program can be obtained via a computer connected to the equipment; this same signal can be sent up to 50 meters away from the device, for example, to the nurses' station, and can also be saved on a CD with up to a year of operations performed or, if the user requires it.
• Operation by means of self-generated steam via an electric steam generator.

Technical specifications:

• Motorized self-cleaning valves, which is an exclusive technological development
• Inner chamber: 50 x 50 x 100 cm (20 x 20 x 40")
• Inner chamber made of 316L type, 4.6 mm thick.
• Outer jacket of 304 type stainless steel with a thickness of 6.35 millimeters, sealed with electric welding, which has been tested at a hydraulic pressure of 3.5 kgr./cm2. (80 lbs/in2) and a temperature of 145° Celsius. The chamber is lined with 25 millimeter (1") fiberglass with aluminum coating, as thermal insulation.
• The door is made of ½ inch thick stainless steel plate, thus exceeding the international ASME standard for boiler pressures.
• Power consumption:
  • VOLTAGE: 220 volts per phase of 55 amperes (three-phase current);
  • WATTS: 12,000 to 18,000 watts of power, depending on the model
  • OPERATING PRESSURE is 1.4 kgs./cm².