- SKU: compresor-grado-medico-de-15hp-duplex-de-240-galones-mod
- BARCODE: compresor-grado-medico-de-15hp-duplex-de-240-galones-mod
- VENDOR: Prosalud.me
Powerex Medical Grade Duplex 15HP 240 Gallon Compressor Mod. MTD1506 with Refrigerants Cat. PWX-MTD1506-3K4
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
15HP Medical Grade Compressor, 240-gallon Duplex Mod. MTD1506 with Refrigerants Cat. PWX-MTD1506-3K4 Brand Powerex
Description:
The oil-free reciprocating compressor system is a tank-mounted design consisting of
two oil-free reciprocating compressors and associated equipment, an ASME painted air receiver, and a wired control panel. The package is provided with single-point connections for electrical, air discharge, and condensate drains. The only field connections required will be the system discharge, the power connection at the control panel, and the condensate drain connection. All interconnecting piping and wiring are included and operationally tested prior to shipment.
The oil-free reciprocating air compressor is a two-stage design with head unloaders to provide start/stop or continuous operation. The compressor pump is a completely oil-free design. Composite piston technology, cooling fans, and continuous lubrication bearings provide quality, low-maintenance, and oil-free air. The pistons are made of heat-repelling composite resin with piston rings constructed of a PTFE material.
The piston rings have a minimum service life of 10,000 operating hours. Each compressor is equipped with the following:
- Isolation valve, check valve, and safety valve.
- ODP electric motor, drive pulley, belts, and belt guard
- Air-cooled aftercooler with moisture separator (see description below)
- TMPD (Thermal Malfunction Protection Device)
- Spring Isolators
Tank Receiver:
The ASME National Board registered 200 psig working pressure, horizontal air receiver is provided with:
- Pressure gauge • Safety valve
- Sight glass
- Manual and automatic tank drain.
- 3-valve bypass plumbing
- External paint and internal lining to resist corrosion
NFPA Control Panel:
NEMA 12, UL508A listed and labeled with two control transformers with fused primary
and secondary circuits. The panel will have an automatic alternation and "in use" reserve alarm with visual and audible indicators. All alarms have dry contacts on a labeled terminal strip for remote alarms. The panel will provide power for the complete system, including all dryers, drains, desiccant monitors, and alarms, with single-point electrical connection. Each compressor will be equipped with the following:
- Disconnect
- Magnetic starter
- Illuminated HOA switch
- High temperature shutdown with visual and audible alarms.
- Hour meter.
Air-cooled Aftercoolers:
Each compressor features fender-mounted aftercoolers and is sized for a 15-degree F approach temperature. The units are constructed with copper tubes and metal headers.
Air Purification System:
- Dual refrigerant air dryers
- Dual pre-filters
- Dual pressure reducing valves with gauges and safety relief valves
NOTE: FOR MTD SYSTEMS WITH OPTIONAL DRYER PACKAGE INSTALLED, IF THE SYSTEM IS 5 HP OR LESS, THE DRYERS ARE TANK MOUNTED. IF THE SYSTEM IS 7.5 HP OR GREATER, THE DRYER PACKAGE IS ON A STAND-ALONE SKID.
Monitoring Equipment:
- CO monitor with audible/visual alarms and dry contacts for remote alarm signal.
- Dew point monitor with audible/visual alarms and dry contacts for remote alarm signal
System Connections:
The system is supplied with a remote intake connection and flexible connectors for intake and discharge. All comply with current NFPA 99 requirements. Includes isolation pad.
3K4 TERMINATION
Compressor type based on climate and location of exposure, reciprocating or refrigerated.
Features:
- Clean, oil-free dry air.
- NFPA 99 compliant.
- Carbon monoxide monitor.
- Dew point monitor.
- Corrosion-resistant ASME tank receiver.
- NEMA 12, UL-certified medical control panel.
- Dual refrigerated dryer system.
- Medical filter package (not shown).
- High-performance motor.
- Low-pressure alarm system.
- Modular design concept.
- Electric moisture drain.
- Aftercooler and drain trap.
- 3-year pump warranty.
- 1-year system warranty.
Benefits:
- Low annual maintenance costs.
- Easy installation.
- Turnkey system.
- Reliability.
- Low operating temperatures.
- Technology: Piston
- Power: 15HP
- Configuration: Duplex
- Flow: 50.9 scfm at 50 psig
- Tank: 240 gallons Horizontal
- Dryer: Refrigerative - Duplex
- Control panel: Duplex - Analog
- Voltage: 230/3 / 60hz
- Free shipping on orders over $50
- Standard delivery within 2–5 business days
- Easy 30-day returns
- Return items in original condition for a full refund