Digital alcohol detector, model FC300e with printer Cat. ALC-FC300e AlcoCheck

FC300e Digital Alcohol Detector with Printer Cat. ALC-FC300e AlcoCheck

FC300e Digital Alcohol Detector with Printer Cat. ALC-FC300e AlcoCheck

The AlcoCheck FC300e® is designed to measure the level of alcohol in human breath. The results obtained by this equipment are used in the diagnosis of alcohol intoxication.
The accuracy of the equipment has been established with reference to a Blood Alcohol Concentration (BAC) of 0.008 and 0.032% BAC. Before performing a test, wait at least 15 minutes after the last alcoholic beverage.
Use the equipment only at temperatures between 0 °C ~ 40 °C

Note: It is recommended to calibrate the device after 500 tests.

Technical specifications:

Sensor: Electrochemical fuel cell
Display range: 0-1.500 mg/L BrAC; (3.000% BAC, 0.300% BAC)
Accuracy: ±0.03 mg/(0.05%, 0.005%) at reference point
Memory: Log for 1000 tests
Warm-up time: 15 seconds
Test time: 10 seconds
Test repetition: Less than 60 seconds
Alarm sound: When exceeding the reference point
Display: 4-digit LCD with backlight
Size: 106mm x 51mm x 19mm
Power supply: 9V alkaline battery or 12V DC adapter
Battery life: Approximately 500 tests
Operating temperature: 0 °C ~ 50 °C
Mouthpiece: Disposable with individual packaging
Size: 115x60x23 mm
Function: Passive and active
Memory download: To PC via USB-RS232 cable
Analyzed data printing: To PC via USB-RS232 cable
Pressure detection and breath interruption
How to use:
If this is your first time using the AlcoCheck FC300e, install a 9V battery in the unit.

Insert one of the mouthpieces into the corresponding hole.
Press and hold the "TEST" button and release it when the unit turns on.
The screen will show a numerical test before starting the countdown from 15 to 0.
Press the mouthpiece with your lips, and blow gently and continuously for approximately 6 seconds. You will hear two tones when the device has finished taking the breath sample. You will see the digit "C" move from left to right on the screen while the device analyzes the sample.
The results will be displayed for approximately 30 seconds: E.g., Off 0.250.
If the sample is not valid, the screen will show "Error": E.g., ERR.