Horizontal headboard for patients 1.50 m 3 outlets+rail+lighting Mod. Horizon III Cat. AGM-COHOIIIA418003-000639 Arigmed

1.50 m horizontal patient headboard with 3 outlets+rail+lighting Mod. Horizon III Cat. AGM-COHOIIIA418003-000639 Arigmed

Includes:

• 1 bed lot - Electrical harness: the harness is constructed of 3 multi-strand soft copper conductors with 65 strands and 90-degree Celsius PVC insulation for 600V, grouped in parallel with plastic injection molded ties. Each conductor is AWG 12 type THW 90-degree Celsius flame-retardant, 600V, UL compliant.
• 1 piece - 10-point ground connection bar, made of aluminum or brass, includes screws.
• 10 pieces - Electrical feed-through terminal block, flange-screw connection, mfg. Weidmuller or similar, for maximum AWG 12, maximum voltage 220VAC, UL94 compliant, for DIN rail mounting.
• 1 piece - Metal support basket for 1-liter glass vacuum collection flask, does not include support clip for horizontal or vertical rails. 1 piece - multi-purpose basket or cage (medication holder), made of steel rod with baked electrostatic paint finish or PVC plastic coating (plastisol), does not include support clip for horizontal rail.
• M 1.5 - Structure made with special extrusion aluminum profiles, alloy 6063 temper 5, with minimum thicknesses of 2.5 and 3mm, in compliance with ASTM B221-02 a/a. For assembly of Horizon III A418003 headboard console, 0.363m high and of required length, includes 1 lower horizontal rail for mounting and sliding auxiliary medical equipment; front panel in aluminum profile with finishes specified in the components list. Equipment listed with U.L (Underwriters Laboratories).
• 3 pieces - Support clip for mounting and sliding auxiliary medical equipment on horizontal console rail for quick mounting (spring), made of aluminum with natural matte anodized finish (support for various baskets, document holders, slide, IV pole support, and accessories for medical equipment whose weight does not exceed 5kg).
• 1 piece - Lower lighting module for patient, includes a 60cm long T-8 LED tube, color temperature 4300 Kelvin, electrical power 110-220VAC, controlled by a chain switch (on-off) or by a module of toggle switches, both Leviton brand 110-277V 15A, diffusers made of transparent polycarbonate extrusion with light guides.
• 1 piece - Upper lighting module for patient, includes a 60cm long T-8 LED tube, color temperature 4300 Kelvin, electrical power 110-220VAC, controlled by a module of Leviton brand 120-277V 15A toggle switches, diffusers made of transparent polycarbonate extrusion with light guides.
• M 1.5 - Covering for front panel with baked electrostatic powder paint, standard colors: white (311-70), almond beige (hml10053-1), merida gray (411-16), leaf green (hvl20266), dark blue (311-07), light blue (29057).
• M 0.2 - DIN rail for mounting electrical feed-through terminal block.
• 2 pieces - Hospital grade double electrical outlet NEMA 5-20R (American) electrical voltage 20A 125V 2P3H clv.8300-i ivory color.
• 2 pieces - Hospital grade double electrical outlet NEMA 5-20R (American) electrical voltage 20A 125V 2P3H clv.8300-r red color.
• 1 piece - IV pole support with 2 hooks in curly format, made of aluminum, stainless steel, and injected ABS thermoplastic, does not include support clips for horizontal and vertical rails.
• 1 piece - Leviton brand 120-277V 15A double toggle switch module.
• 2 pieces - Side cover for cable coupling terminal block.
• 2 sets - Side covers at each end of the console made of high-resistance ABS thermoplastic injection for each end of the console (upper and lower set).
• 1 piece - Complete Arigmed Inox series medical gas outlet quick coupling type MC70 AGA (Scandinavian) + M24 aramed thread (only for Mexico) for medical air.
• 1 piece - Complete Arigmed Inox series medical gas outlet quick coupling type MC70 AGA (Scandinavian) + M24 aramed thread (only for Mexico) for oxygen.
• 1 piece - Complete Arigmed Inox series medical gas outlet quick coupling type MC70 AGA (Scandinavian) + M24 aramed thread (only for Mexico) for medical vacuum.
• 2 pieces - Stop for electrical terminal block.
• 3 pieces - Punch-out or space in front service section for mounting medical gas outlets (does not include supports for medical gas outlets).
• 4 pieces - Punch-out or space in aluminum cover in rectangular 1-gang format to receive plastic mounting chassis for electrical outlet (does not include electrical outlet and/or electrical accessories).
• 3 gas outlets - Internal type L copper tubing for each medical gas outlet, maximum length 1.00m, Nacobre brand or similar in quality, compliant with ASTM B819, clean for oxygen use, includes connections for direction changes within the console (copper elbows and couplings), coupling with 10mm tubing from the medical gas outlet (latch valve). Diameters 13mm (1/2") for positive gases and 19mm (3/4") for surgical medical vacuum and anesthesia gas evacuation.