TEHSA Tonalli 1 SD "PLUS" Model Digital Servo-Controlled Radiant Warmer with Integrated Phototherapy, Cat. TEH-TSDPF

Digital Servo Radiant Warmer with Integrated Phototherapy Mod Tonalli 1 SD "PLUS" Cat. TEH-TSDPF TEHSA

Description:

Electromedical equipment with wheels, allowing manual and servo-controlled thermal environment management for critical patients in an open setting for procedures. It features a heating element to provide a radiant temperature not exceeding 39ºC, a regulator to stabilize the patient's temperature and maintain the selected temperature or heating power. Continuous monitoring of control parameters.

Control System:

• Professional control system based on a state-of-the-art microprocessor that allows high-precision operation and translates into maximum safety for patient care and extraordinary thermal performance for critically ill patients.
• Control and programming system for operating parameters through user-friendly interactive menus with only 3 buttons and means to prevent involuntary changes in programming, messages on a module with signs and LED indicators, as well as audible alarms and their suppression with the menu button.
• Initial self-test or self-diagnosis of system functions upon startup or power-on of the equipment.

Parameter Monitoring:

• Simultaneous digital display of all thermal parameters: Selected patient temperature (control temperature), monitored skin temperature, and measured peripheral temperature; heater power on a 5” high-contrast LCD screen, with 4 selectable character intensity options.
• Selected and monitored temperature of the thermal mattress. (Optional).
• Features a visual indicator of heater power in a 20-segment digital bar (better quality than LEDs). Each segment is equivalent to 5% of the total heating percentage, which is 100%.
• Alert messages in Spanish with conventional signs on the control panel.
• Automatic cut-off control for over-temperature.
• RS232 port.

Operating Modes:

• MANUAL: In this mode, the heater power is controlled in percentages ranging from 0% to 100%, depending on the desired preheating time.
• SKIN or SERVO-CONTROLLED: In this mode, the infant's temperature is automatically controlled by means of the skin sensor and the equipment's servo control.

Temperature Sensors:

• Reusable skin sensor (disposable optional), high-precision thermistor. Self-evaluation 10 times per second.

Heater Module:

• Heating element consisting of a 500 W maximum, high-efficiency quartz electrical resistance, with a heating capacity of 45 to 50 sec and complete cooling in 15 sec, quartz-coated and contained in a parabolic metal structure, non-deformable by heat.
• With automatic preheating that starts when the system is turned on.
• Heater module with 90° rotation to both sides for X-ray imaging, to avoid interrupting patient warming.
• Features an examination light or lamp with an LED lighting system.

Operating Data:

• Selection or control range in manual mode: 0 to 100% of heater power.
• Selection or control range in skin mode: 34ºC to 38°C.
• Manufacturer programmable selection range in skin mode: 34ºC to 38°C.
• Thermometer resolution: 0.1°C
• High-temperature alarm: 39.0°C + - 0.1°C.
• Difference in selected and monitored temperature range: + - 0.2°C

• Cradle enclosed by 4 transparent acrylic panels or railings, 9mm thick, 2 longitudinal, and 22 cm high, foldable and beveled to prevent cuts. Rear panel with 2 cable or cannula ports.
• Hook for venoclysis, liquid holder, solution holder, or IV pole.
• Infusion pump support.
• Radiolucent mattress base to allow X-ray imaging.
• Stainless steel plate on which various sizes of cassettes or X-ray plate holders can be placed.
• Radiolucent, waterproof, hypoallergenic mattress, prevents mold formation.
• Fixed or variable height support (the latter is optional).
• Continuous tilt system of 15° to both sides (Trendelenburg and reverse Trendelenburg).

Base:

• Mobile equipment base. 2 of 4 wheels with brakes.

Approximate Dimensions:

• Height: 190 cm.
• Clearance height from floor to heating element: 175 cm.
• Width: 75 cm.
• Length: 115 cm.
• Weight: 125 Kg.

Electrical Specifications:

• Supply voltage: 120 V a.c. + - 10%.
• Maximum power consumption: 800 Watts.
• Line frequency: 60 Hz.
• Current: 6.5 Amp.

Optional Equipment Accessories:

• Integrated phototherapy lamp based on blue LED light, with a wavelength ranging from 400 to 550 nm. Lifespan of 50,000 hrs. With protective phototherapy eye mask for the neonate.
• 12-hour electronic clock for phototherapy treatment.
• Hour counter for the lifespan of the phototherapy lamp.
• Electric variable height adjustment system (with handheld button control).
• Cabinet with drawers.
• Tray for monitor and instruments.
• Resuscitation, air-activated suction (Venturi type) and humidification system consisting of: Oxygen input port for "E" type oxygen cylinder with regulator and flow meter, oxygen cylinder holder, 1 humidifier, 1 nasal cannula. The suction system includes the valve or trumpet to regulate the suction force and 1 glass container or reservoir with a metal basket.
• Support for type E oxygen tank.
• Reusable manual resuscitator with neonatal mask, reservoir bag, and oxygen extension.
• Stopwatch for Apgar tests with programmable alarms. Can be programmed to 1, 5, and 10 minutes for assessment.
• Servo-controlled gel mattress (displays selected and monitored temperature).
• Additional built-in power outlet.
• Integrated infant scale for weighing the neonate. With digital weight display (measurement range of 0.5 to 8 kg with 0.01 kg resolution).
• Built-in electrical voltage regulator.
• Integrated multiparameter neonatal vital signs monitor. With LCD screen display of ECG and plethysmography waveforms, with audible and visible alarms for alterations in: heart rate, respiratory rate, pulse oximetry.